Builders Hardware
Item #2018345
Simpson Strong Tie Anchoring Adhesive 1 Each SET-XP10
XCD
$
146.70
Description
- Simpson Strong Tie.
- SET-3G.
- Epoxy Adhesive w/ 1 Nozzle and Extension.
- 8.5-oz.
- High-Strength.
- Superior bond strengths permit ductile solutions in high seismic areas.
- Improved sustained load performance at elevated temperature.
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
- Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.
- Low-odor formulation.
- For use with potable water.
- SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40F (4C) to 100F (38C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.
In Stock: 56
Related Products
-
-
Glues, Epoxy & Adhesives
$6.04
Do It Best Air Conditioning Weatherstrip 1-1/4x1-1/4x42 Inch 1 Each AC42HDI
-
-
-
-
-
Glues, Epoxy & Adhesives
$12.42
Do It Best Foam Weatherstrip Tape 3/4x5/16 Inchx10 Foot White 1 Each R534WHDB
-
Glues, Epoxy & Adhesives
$14.31
Do It Best Foam Weatherstrip Tape 1/2x6/16 Inchx10 Foot Black 1 Each R930HDB
-
-
